In a workshop using cnc machines are very important. for it takes care of very serious cnc machine. One of the things that have to do is "Warming Up". cnc program warming up much needed weeks to initiate activities in cnc machining process. especially when the engine quit in a long time (8 to 10 hours). This is very useful to sustainability cnc machine itself. According to the experience I have gained useful engines warming up the program include:
1. Streamlining the lubrication oil circulation after not circulate (stop)
2. Error check before mass production
ATC Spindle
X Y Z - Axis movement
The flow of coolant
3. Check hydraulic oil for Clamp and Unclamp (clamping function) And much more
Here I give examples of CNC program warming up that I apply in the machine controller Toyosk TVT 313M1 with Fanuc Series 32i Model A
O1000 ( X Y Z - TRVRS RUNNING WARMING UP )
;
G0G91G28Z0M08M50;
G0G91G28X0Y0;
G80G40G49;
M10M12M60;
G4X3.0;
G0G90G53X-280.0Y-350.0;
M3S200M7;
G53Z-300.0;
G4X3.0;
M5M9;
M11M13M61;
/M99;
G0G91G80G28Z0;
G4X1.0;
G91G28X0Y0M9;
;
M30;
;
%
Make sure the movement of 0%, 25%, 50% and 100% (feed rate)
Make sure the first run the program with the command "single block"
If this is done with certain serious age of cnc machine component hardware and software will grow old
